FLXCode

FLXCode apps

Appearance

Audio tools

Make a sound, check the gear that plays it, or look at what a microphone hears.

These tools cover three jobs. Some make sound: a tone at any frequency from 1 Hz up, or white, pink, brown and green noise with a sleep timer. Some check hardware: speakers, bass, headphones and a microphone. The rest listen and show you what they hear, as a note name, a loudness in dB or a picture of frequency over time.

Everything runs in the browser. The microphone tools analyse the sound on your device, and nothing you record or play is uploaded. The one exception is Text to Speech, where an optional box lets your browser use its online voices, and then the browser maker receives the text. If you only need one thing, start with the Tone Generator, and use the Speaker Test to check that both channels work and are in phase.

12 tools in this group

Common tasks

Questions

Which tool plays a specific frequency?

The Tone Generator. Type a value in Hz or pick a note, then choose sine, square, triangle or sawtooth.

Is my microphone recorded or sent anywhere?

No. The microphone tools read the signal in your browser to draw levels, notes or a spectrogram. Nothing is uploaded, and the page is not allowed to send audio to other sites. Only the optional online voices in Text to Speech send text to the browser maker, and that box is off by default.

Why does the decibel meter read differently from a professional meter?

Phone and laptop microphones are not calibrated. The Decibel Meter lets you set an offset against a known level, but treat the numbers as an estimate.

Can I use these with Bluetooth headphones?

Yes for playback. Bluetooth adds delay and can limit the frequency range, so use a wired connection when you test accuracy.