FLXCode MGRS to Lat Long Converter

FLXCode apps

Appearance

MGRS to Lat Long Converter

Paste an MGRS reference and get latitude and longitude. An MGRS reference names a square, so the tool gives its corner and its centre and says which is which.

Zone, band, two square letters, then 0 to 10 digits. Spaces and lower case are fine, for example 33U XP 04 35.

Example: Vienna

  • South-west corner, decimal degrees (the MGRS reference point) 48.20773, 16.37291
  • South-west corner, degrees, minutes, seconds 48°12'27.8"N 16°22'22.5"E
  • Centre of the square, decimal degrees (best guess for the square) 48.20817, 16.37359
  • Centre of the square, degrees, minutes, seconds 48°12'29.4"N 16°22'24.9"E

100 m square. MGRS names a square. By the standard the point is its south-west corner. Some tools give the centre instead.

I read this as

Zone and band
33U
100 km square
XP
Digits
020 (easting) and 403 (northing)
Datum
WGS 84 (assumed)

33U XP 020 403

Lat long to MGRS

Decimal degrees, DMS or degrees and decimal minutes. Latitude first. The digits are cut off, never rounded.

Have UTM instead? UTM to lat long converter. Need plus codes or a list? Coordinate Converter.

No ads. No account. Nothing you type is uploaded. Opening a map link sends that point to OpenStreetMap or Google. How we count

Problem or idea? Email us

Quick start

  1. Paste the reference into the box. Zone and band come first, then two square letters, then the digits.
  2. Read the "I read this as" box. If a part is wrong, the message names it.
  3. Copy the corner or the centre, or open either on a map.
  4. For a plain UTM position, use the UTM to lat long converter.

Formats it reads

ExampleNotes
33UXP0435Compact. Zone, band, square letters, then digits.
33U XP 04 35Spaces between the parts.
33uxp0435Lower case.
33U XPLetters only: the 100 km square.
MGRS 33U XP 0435A leading MGRS is ignored.
33U XP 04350 40354Five digits each: a 1 m square.

Corner or centre

MGRS names a square. By the standard the point is its south-west corner. Some tools give the centre instead. For a 1 km square the two points are about 700 m apart, for a 100 m square about 70 m. Use the corner when you need the reference point of the standard, and the centre when you want the best single guess for where something inside the square is.

The digits are cut off, not rounded. 33U XP 04 35 is a 1 km square. Its corner is 4 km east and 35 km north of the corner of the 100 km square XP, and every point inside it shares those digits.

Worked examples

MGRSPlaceSquareSouth-west cornerCentre
33UXP020403Vienna100 m square48.20773, 16.3729148.20817, 16.37359
56HLH34365094Sydney10 m square-33.868874, 151.209205-33.868830, 151.209260
32VKN9700Bergen, Norway (zone 32V)1 km square60.3853, 5.316360.3900, 5.3249
33XWG1427883355Longyearbyen, Svalbard (zone 33X)1 m square78.2231959, 15.626668478.2232003, 15.6266906

Accuracy and limits

  • Checked against python mgrs 1.7.0 / pyproj 3.8.0 on 352 points and 48 references that must be refused, largest difference under 0.01 mm. Download the test points (CSV). They cover every zone in both hemispheres, every precision, band X, Norway, zone and square edges, and references that must be refused.
  • WGS 84 only. No datum shifts.
  • MGRS covers 80°S to 84°N here. UPS for the poles is not supported.
  • The grid letters follow the current WGS 84 lettering. Some old maps used another lettering, and this tool does not read that.

Troubleshooting

  • "does not exist in zone": the two square letters do not fit the zone and band. Check them against the map margin.
  • "the digits must split evenly": the easting and the northing need the same number of digits.
  • The point is a few hundred metres from where you expected: look at the precision line. A 1 km square can sit 700 m from its centre.
  • The point is far away: check the band letter. The same square letters repeat every 2,000 km north to south, and the band tells them apart.

How it works

MGRS is UTM with letters. The zone and band are the UTM ones. The 100 km squares are lettered by a rule that depends on the zone number, and the digits are the metres inside the square. The conversion uses the same transverse Mercator code as the UTM pages and the Coordinate Converter, so a reference and its UTM position agree. Nothing is uploaded. We count events without cookies (details).

Need the zone and band limits, the Norway and Svalbard exceptions or the square letters? See the MGRS and UTM grid zone reference.

FAQ

How do I convert MGRS to latitude and longitude?

Paste the reference, for example 33UXP020403. The tool shows how it read the zone, band, square letters and digits, then gives the square's south-west corner and its centre in decimal degrees and DMS. Spaces and lower case do not matter.

What do the parts of an MGRS reference mean?

The number and first letter are the grid zone, the same zone and band as in UTM, for example 33U. The next two letters pick a 100 km square inside it. The digits are metres inside that square: the first half is the easting, the second half the northing.

Is the point the corner or the centre of the square?

MGRS names a square. By the standard the point is its south-west corner. Some tools give the centre instead, so two tools can differ by half a square. This page shows both and labels them.

How many digits do I need?

Two digits (one pair) name a 10 km square, four a 1 km square, six a 100 m square, eight a 10 m square and ten a 1 m square. Digits are cut off, not rounded, so a shorter reference is the same square seen from further away, not a nearby one.

Why does it say a letter does not exist?

The 100 km column letters repeat in a pattern that depends on the zone, I and O are never used, and a square has to lie in its zone and band. The tool refuses a reference whose square cannot exist and says whether the zone, the band or the square letters are wrong.

What is the difference between UTM and MGRS?

They describe the same grid. UTM writes full eastings and northings in metres (33U 602065 5340354). MGRS replaces the leading digits with two letters and keeps the rest (33U XP 02065 40353), which is easier to say over a radio. UTM rounds to the metre and MGRS cuts the digits off, so the last digit can differ by one.

Does it handle the poles?

No. MGRS uses UTM from 80°S to 84°N and UPS beyond that. A reference that starts with A, B, Y or Z is a polar one, and the tool says so instead of guessing.

Which datum does it assume?

WGS 84, the datum GPS uses. A reference written for NAD27 or another old datum can be off by tens or hundreds of metres here. This tool does not shift datums.

Can I turn a latitude and longitude into MGRS?

Yes. The box under the result takes a latitude and longitude and gives the reference at 1 m, 10 m, 100 m, 1 km and 10 km. The digits are cut off, not rounded.

How accurate is it?

Checked against python mgrs 1.7.0 / pyproj 3.8.0 on 352 points and 48 references that must be refused, largest difference under 0.01 mm. The test points are public: you can download the CSV and check them yourself.

Are my coordinates uploaded or saved?

No. The conversion runs in your browser. What you type is not put in the address bar, not stored and not counted. We only count events such as "a conversion happened". Opening a map link sends that point to OpenStreetMap or Google, because you asked it to.

More from FLXCode

Share MGRS to Lat Long Converter