Left and Right Speaker Test
Press Left, Right and Both. Hear each side on its own, then tell the page what you heard.
https://flxcode.com/left-right-speaker-test/
Stopped
Hear each side on its own. The lamps show what the page sends.
Options
The result buttons appear after you have played Left and Right.
Check phase and range in the speaker test
Using a phone? Use headphones.
Phone speakers are often mono, so Left and Right sound the same there. Use headphones. The page can't detect a dead speaker, so listen. A mono audio setting in the system can't be detected either, and Bluetooth call mode makes both sides the same.
The volume slider sets the level in the sound itself. How loud it is at your ear also depends on your device volume and speakers.
Start quiet, turn up slowly. Nothing is uploaded: the sound is made in your browser.
No sound?
- iPhone: check the ring/silent switch and the media volume.
- Check the system volume and which output is selected (speakers, headphones, Bluetooth).
- Bluetooth headphones switch to call mode while a microphone is open: sound becomes mono and dull.
- A mono audio setting in accessibility makes left and right sound the same. A web page can't detect it.
- Another tab or app may be using the audio. Close it and press Play again.
No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.
Problem or idea? Email us
How to use it
- Turn your device volume down. The test starts at 10%.
- Press Left. You should hear three short bursts on the left only, and the L lamp lights up.
- Press Right, then Both. Both should sound centred, on both sides.
- Tap what you heard: left and right OK, swapped, one side silent, or the same on both sides.
- Tick "Say the side out loud first" if you want to hear the word before each sound. Stop at any time with the Stop button or Esc.
What you should hear
| Button | Good | Problem |
|---|---|---|
| Left | Sound only on the left. | Sound on the right, on both, or nothing. |
| Right | Sound only on the right. | Sound on the left, on both, or nothing. |
| Both | Sound on both sides, centred. | Sound on one side only, or to one side of centre. |
Troubleshooting
- Swapped: swap the cables or the earbuds, or fix the channel setting in your player.
- One side silent: check the balance slider, the cable and the plug.
- Same on both sides: you may be on one phone speaker, or Bluetooth is in call mode. A mono audio setting in the system does the same, and a web page can't detect it.
More causes, with phase and range checks, are in the speaker test troubleshooting list.
Accuracy and limits
The lamps show the signal the page sends to each channel, measured in the browser. They can't tell you whether a speaker works, so the answer is what you hear. This test does not check phase, frequency range or loudness. For those, use the speaker test. For a rattle at one frequency, use the speaker rattle test. The volume slider sets the level in the sound. How loud it is at your ear depends on your device volume and speakers.
How it works
The page makes one pink-noise buffer and plays it through the Web Audio API on one or both channels. Every burst fades in and out over 15 ms, so nothing clicks. Spoken labels use the speech voice your browser already has, on your device. Nothing is recorded or uploaded. We count events without cookies (details).
FAQ
Why does Both sound off-centre?
Both plays the same noise on each side, so it should sit in the middle. If it leans, check the balance setting, a weak earbud, or whether you sit closer to one speaker. Sit at equal distance from both and press Both again.
What is the pink noise option for?
Short bursts make left and right obvious. Eight seconds of steady pink noise gives you time to walk to a speaker, check the cable or put your ear near the driver. Pink noise has equal energy in each octave, so it sounds even and is easy to place.
Why does the voice come out of both speakers?
The spoken label comes from your device's own speech voice, outside this page's audio, so it can't be sent to one side. It plays first, then the test sound plays on the side you chose. If your browser has no speech voice, the option does not appear.
The lamps lit up but I hear nothing on that side. Why?
The lamps show the signal the page sends to each side, measured inside the browser. They can't see your cable or your speaker. If a lamp is lit and you hear nothing, the problem is after the browser: the balance setting, the cable, the plug or the speaker.
What does Swapped mean?
You pressed Left and heard it on the right, and the other way round. Swap the cables or the earbuds, or fix the channel setting in your player or amplifier.
Does anything get uploaded?
No. The sound is generated in your browser. We count events, like which button you pressed, without cookies.
More from FLXCode
Speaker TestNew
Phase, sweep and range. A quick check for speakers and headphones.
Speaker Rattle TestNew
Find the frequency where a speaker rattles. A slow 20 to 300 Hz glide you can mark, narrow to a band and repeat.
Tone GeneratorNew
Play any frequency from 1 Hz to 22 kHz. Sine, square, triangle or sawtooth.
Mic TestNew
Check your microphone: level, clipping, a quick recording, and what your browser does to the sound.