FLXCode Paint Calculator

FLXCode apps

Appearance

Paint Calculator

Enter the room size, or each wall. You get gallons of paint, with doors and windows taken out and the extra coats counted.

Room
Doors and windows to leave out

Example 2 coats

2.09 gallons of paint

Paint to buy
Buy2 gallons and 1 quart (2.25 gal)
In litres7.9 L

The sums

  • Walls before doors and windows416 sq ft
  • Doors and windows-50 sq ft
  • Walls to paint366 sq ft
  • 366 sq ft x 2 coats / 350 sq ft per gallon2.09 gal

Rounded up to the next quart. Textured walls, a dark color over a light one, or bare drywall can need more.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

Quick start

  1. Measure the room length, width and wall height in feet. Use decimals: 12.5 ft is 12 ft 6 in.
  2. Set the number of doors and windows. Change their size if yours are not standard.
  3. Choose the number of coats and add the ceiling or primer if you need them.
  4. For a room that is not a rectangle, switch to Wall by wall.

Worked examples

Computed by the same engine as the tool above, with 350 sq ft per gallon and two coats unless noted.

RoomArea to paintPaintBuy
Bedroom, 12 x 14 ft, 8 ft walls, 1 door, 2 windows366 sq ft2.09 gal2 gal + 1 qt
Small bathroom, 5 x 8 ft, 8 ft walls, 1 door, 1 window179 sq ft1.02 gal1 gal + 1 qt
Living room, 16 x 20 ft, 9 ft walls, 2 doors, 4 windows548 sq ft3.13 gal3 gal + 1 qt
Bedroom with ceiling too534 sq ft3.05 gal3 gal + 1 qt
Bedroom with primer and one coat of paint366 sq ft1.05 gal1 gal + 1 qt, primer 1 gal + 1 qt

The formula

walls = 2 x (length + width) x height

area to paint = walls - doors x door area - windows x window area (+ ceiling)

gallons = area to paint x coats / coverage per gallon

Primer uses the same area with one coat and its own coverage number. In metric the coverage is in square metres per litre.

Numbers this uses

Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.

  • Coverage is 350 sq ft per gallon. the low end of the 350 to 400 on most latex paint labels; rough or dark walls need more paint.
  • Primer coverage is 300 sq ft per gallon. typical primer label range is 200 to 400; one coat.
  • Standard door is 20 sq ft. 3 ft x 6 ft 8 in, the usual interior door.
  • Window is 15 sq ft. 3 ft x 5 ft, a common double-hung size; measure yours.
  • Coats is 2. two coats is the usual finish; one coat over a similar color.
  • Rounding is up to the next quart. quarts are the smallest can most stores sell by the paint, 0.5 L in metric.
  • US gallon is 3.785 L. one US gallon is 4 quarts.

Measuring a room

  • Measure each wall at the baseboard, and add them up if the room has bumps. Wall by wall mode takes any number of walls.
  • Gables and sloped ceilings are triangles. Half of base times height gives the area. Enter it as a wall with that base and half the height.
  • Skip the baseboard and the trim, they are painted with leftovers. If you plan to paint trim, add a quart.
  • Rough texture soaks up 20% more paint or so, and a deep color may need an extra coat.

Buying the right can

Say the tool tells you 2 gallons and 1 quart. Compare the price with 3 gallons. A quart often costs more per ounce, and a full third gallon gives you a touch-up reserve. Buy all the paint for one room at one time and mix the cans together in a bucket, so the color is even from wall to wall.

Your sizes stay in this page and are not uploaded. We count events without cookies (details).

FAQ

How much paint do I need for one room?

Add up the wall area, take away doors and windows, and divide by the coverage. A 12 x 14 ft bedroom with 8 ft walls has 416 sq ft of wall, and 366 sq ft after the door and windows. Two coats at 350 sq ft per gallon take 2.09 gallons, so buy 2 gal + 1 qt.

How many square feet does a gallon of paint cover?

Most labels say 350 to 400 sq ft for one coat on a smooth, primed wall. The tool uses 350, the safer end. Rough, dark or bare walls drink more paint, so use a lower number for them.

Should I subtract windows and doors?

Yes, but only the big ones. A door is about 20 sq ft and a window about 15. Small windows may not be worth the effort. The tool lets you change the count and the size of each.

How many coats do I need?

Two coats is the usual answer. One coat can be enough when the new color is close to the old one and the paint is a good one. Going from dark to light often takes a primer plus two coats.

How much paint for the ceiling?

The ceiling is length times width. In the bedroom example that is 168 sq ft, which raises the total to 3.05 gallons, or 3 gal + 1 qt to buy. Ceiling paint is often a flat white sold in its own gallon.

Do I need primer?

Use it on bare drywall, patched spots, stains and big color changes. The tool adds one coat of primer over the same area. Some paints say they have primer built in, but they do not cover a stain as well as a real primer.

Why are the results in quarts?

Paint is sold in quarts, gallons and 5 gallon pails. The tool rounds up to the next quart so you have a little left for touch-ups. In metric it rounds up to the next half litre.

Is anything I type uploaded or saved?

No. The sums run in your browser. Your sizes are not put in the address bar, not stored and not counted. Only your choice of US or metric units is remembered in this browser.

More from FLXCode

Share Paint Calculator