FLXCode Board Foot Calculator

FLXCode apps

Appearance

Board Foot Calculator

Enter thickness, width and length for each set of boards. You get the board feet, and the cost if you add a price.

Boards

Example 4 pieces

16 board feet

Totals
Cubic metres0.0378

The sums

  • 4 x 1 in x 6 in x 8 ft / 1216 bf

Use the size you are charged for. Lumberyards price rough hardwood by its nominal thickness (4/4 is 1 in) and dimension lumber by the piece or by the foot.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

Quick start

  1. Type the number of pieces, the thickness and width in inches and the length in feet.
  2. Use Add boards for each different size on your cut list.
  3. Enter the price per board foot if you want a cost, and a waste percent if you want a margin.

Worked examples

Computed by the same engine as the tool above.

BoardsSizeBoard feet
1 x 6 x 8 ft, one board1 in x 6 in x 8 ft4
4/4 oak, 8 in wide, 10 ft1 in x 8 in x 10 ft6.67
8/4 walnut, 6 in wide, 8 ft2 in x 6 in x 8 ft8
Eight 1 x 4 x 6 ft slats8 x 1 in x 4 in x 6 ft16
Twelve 1 x 12 x 12 in shelves12 x 1 in x 12 in x 1 ft12

The formula

board feet = pieces x thickness (in) x width (in) x length (ft) / 12

If you have all three sizes in inches, use thickness x width x length / 144. Both give the same answer. In metric the tool turns the volume into cubic metres and divides by 0.00236.

Nominal and actual sizes

Lumber is named before it is dried and planed, so the name is bigger than the board. The table shows common US sizes and what an 8 ft piece holds by each.

NameActual inNominal bf, 8 ftActual bf, 8 ft
2 x 41.5 x 3.55.333.5
2 x 61.5 x 5.585.5
1 x 60.75 x 5.542.75
5/4 x 61 x 5.553.67

Numbers this uses

Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.

  • Board foot is 144 cu in. 1 in thick x 12 in wide x 12 in long (about 2.36 litres).
  • Formula is thickness (in) x width (in) x length (ft) / 12. the same board foot rule used by every lumberyard.
  • Quarter notation is 4/4 = 1 in, 8/4 = 2 in. rough hardwood is sold in quarters of an inch of thickness.
  • Waste is 0% by default. most buyers add 10 to 20% for defects and cuts; set it in the field.

Quarter notation

Rough hardwood is sold by quarters of an inch: 4/4 is 1 in, 5/4 is 1.25 in, 6/4 is 1.5 in and 8/4 is 2 in. Type the inch value in the thickness box. The box also offers the common values from a list.

Common mistakes

  • Mixing feet and inches for the length. Length is in feet here, and the 12 in the formula is the only conversion.
  • Using the thickness after planing. Hardwood is sold by rough thickness, so a 4/4 board that you plane to 3/4 in is still 1 bf per foot of 12 in width.
  • Forgetting that a price per board foot applies to the whole board, not to the part you keep.

Your sizes stay in this page and are not uploaded. We count events without cookies (details).

FAQ

What is a board foot?

A board foot is a volume of wood: 144 cubic inches. That is a board 1 in thick, 12 in wide and 1 ft long. Hardwood is sold by it because boards come in many widths and lengths.

How do I calculate board feet?

Multiply thickness in inches by width in inches by length in feet, then divide by 12. A board 1 x 6 x 8 is 1 x 6 x 8 / 12 = 4 board feet. For several pieces, multiply by the count.

Do I use nominal or actual size?

Use whatever the seller charges by. Hardwood is priced by the rough thickness in quarters, so 4/4 means 1 in and 8/4 means 2 in. For a 2 x 4 x 8 the nominal size gives 5.33 bf and the actual size of 1.5 x 3.5 in gives 3.5 bf. Softwood dimension lumber is usually sold by the piece or the foot instead.

How do I figure out the cost?

Multiply the board feet by the price per board foot. A 1 x 8 x 10 board is 6.67 bf. With 15% waste that is 7.67 bf, and at 9.50 per board foot the cost is 72.83. Enter the price in the tool and it does the same.

How much waste should I add?

Ten to 20% is common. Rough boards have knots, checks and bark edges, and every cut leaves an offcut. Use more for a project with long clear pieces, and less if you can work around defects.

Is there a metric version?

Yes. Switch to metric and enter thickness and width in millimetres and length in metres. The tool still gives board feet and also cubic metres. One board foot is 0.00236 cubic metres.

How many board feet are in a 2 x 4?

It depends on the length and on the size you use. An 8 ft 2 x 4 is 5.33 bf by its nominal size. A 10 ft 2 x 4 is 6.67 bf.

Is anything I type uploaded or saved?

No. The sums run in your browser. Your sizes and prices are not put in the address bar, not stored and not counted. Only your choice of US or metric units is remembered in this browser.

More from FLXCode

Share Board Foot Calculator