FLXCode White Noise

FLXCode apps

Appearance

White Noise

Press Play. Set a timer if you want it to fade out by itself.

Flat: the same energy at every frequency. Bright and hissy.

Sleep timer

Stopped

Starts quiet on purpose. Keep the speaker away from your ears, and well away from a baby's cot. Nothing is uploaded: the sound is made in your browser.

No sound?
  • iPhone: check the ring/silent switch and the media volume.
  • Check the system volume and which output is selected (speakers, headphones, Bluetooth).
  • Bluetooth headphones switch to call mode while a microphone is open: sound becomes mono and dull.
  • A mono audio setting in accessibility makes left and right sound the same. A web page can't detect it.
  • Another tab or app may be using the audio. Close it and press Play again.

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

What white noise is

White noise has the same power at every hertz (0 dB per octave). Each octave covers twice as many hertz as the one below it, so the top octaves hold most of the energy and the sound is bright and hissy, like a radio between stations. It is made here by drawing random numbers, one per sample.

Pink noise falls 3 dB per octave and brown noise falls 6, so both sound lower and softer. On small speakers white is the harshest of the three.

How white noise sounds

Think of TV snow, a shower head, or air from a vent. The ear is most sensitive between about 2 and 5 kHz, and white noise puts a lot of power there, so it seems loud for its level and a little sharp. On a small laptop speaker the hiss is all you get, because almost nothing below 200 Hz comes out.

White noise in numbers

The band from 10 kHz to 20 kHz is 10,000 Hz wide. The band from 20 Hz to 40 Hz is 20 Hz wide. Same power per hertz means the top octave carries 500 times the power of the bottom one, about 27 dB more. That is why a flat spectrum looks tilted when it is drawn per octave.

What people use it for

Many people use it to mask background sound while they sleep or work: traffic, a neighbour's TV, an open office. Sound designers use it as the raw material for wind, surf, hi-hats and snares. It is also a quick test signal for speakers, and a way to hear how a room or a pair of headphones colours the sound.

How to use the timer

Choose 15, 30, 60 or 90 minutes, or 8 hours, under Sleep timer. The countdown begins when you press Play. For the last 45 seconds the hiss fades out and then stops. Because white noise is the sharpest of the four, a fade-out is kinder than a sudden stop. Keep the tab open, since closing it ends the timer.

Other colours

Pink noise, Brown noise, Green noise. All four are in the noise generator. To play an exact tone instead, use the tone generator.

FAQ

Is white noise the same as a fan?

Not quite. A fan has a hum and a low rumble, so it sounds duller. White noise is flat, so it is brighter. If white is too sharp, try pink noise or brown noise.

Will white noise keep playing when the screen turns off?

In most cases yes. The page builds a 30 second loop and plays it through a normal audio player, and phones let that continue with the screen off. The lock screen shows a pause button. Browsers and battery savers differ, so test it for a few minutes before you rely on it overnight.

How loud should white noise be?

Quiet. Turn it up only until the sound you want to cover stops standing out. The slider starts about 10 dB below its top (the top is −15 dBFS RMS), so there is room to go louder on a small speaker. Set the room level with your device volume, and check it with the decibel meter if you like.

Why does white noise hurt my ears on a phone speaker?

A phone speaker drops everything under about 200 Hz and often peaks around 3 kHz, the region where hearing is most sensitive. White noise then sounds all treble. Lower the volume, move the phone further away, or switch to pink noise.

Can I use white noise to test my speakers?

It is a rough check. A flat spectrum shows buzzing, rattles and a missing channel quickly. For a proper left and right check use the left and right speaker test. For frequency response, pink noise with an analyser is the usual tool.

More from FLXCode

Share White Noise