FLXCode Gravel Calculator

FLXCode apps

Appearance

Gravel Calculator

Enter the length, width and depth of the area. You get cubic yards, tons and bags, with extra for compaction.

Area 1

Example with 10% waste

2.04 cubic yards

Amounts
Weight to order2.85 tons (5,704 lb)
Cubic feet55
Cubic metres1.56
Without waste1.85 cu yd, 50 cu ft

Bags instead of bulk

Bags needed
0.5 cu ft bag110 bags
1 cu ft bag55 bags
2 cu ft bag28 bags

The sums

  • Rectangle: 20 ft x 10 ft x 3 in 50 cu ft

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

Quick start

  1. Measure the length and width of the area in feet and inches.
  2. Type the depth you want in inches. Pick the stone type, which sets the density.
  3. For an odd shape, use Circle or Ring, or add several rectangles with Add area.
  4. Give your supplier the tons or the yards. Ask which one they sell by.

Worked examples

Computed by the same engine as the tool above, with 10% extra.

JobStoneCu ydTons
Driveway, 40 ft x 10 ft x 4 inCrushed stone5.437.6
Garden path, 30 ft x 3 ft x 2 inPea gravel0.610.83
Patio base, 12 ft x 12 ft x 4 inCrushed stone1.962.74
Drain trench, 50 ft x 1 ft x 18 inRiver rock3.063.97
Fire pit ring, 8 ft across, 3 ft hole, 4 inPea gravel0.590.79

From volume to weight

Gravel is sold by the ton or by the cubic yard. The tool works out volume first, then weight:

cubic yards = length (ft) x width (ft) x depth (in) / 12 / 27 x (1 + waste)

tons = cubic yards x tons per cubic yard

For metric, it works in cubic metres and tonnes. A metric tonne is 1.102 US tons.

Numbers this uses

Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.

  • Pea gravel is 1.35 tons per cu yd. typical supplier figure, editable.
  • Crushed stone (3/4 in) is 1.4 tons per cu yd. typical supplier figure, editable.
  • River rock is 1.3 tons per cu yd. typical supplier figure, editable.
  • Waste is 10%. compaction and uneven ground, a common allowance; editable.
  • Bags is 0.5, 1 and 2 cu ft. common retail bag sizes, check the label.
  • Ton is 2,000 lb. US short ton. A metric tonne is 2,204.6 lb.

Choosing a stone

  • Driveways and paver bases need stone that locks together, so crushed stone with fines is the usual pick.
  • Paths and play areas feel better with rounded pea gravel, but it moves, so edging helps.
  • Drainage trenches use clean washed stone with no fines, so water gets through.
  • Decorative beds can use river rock or any color you like. A fabric under the stone keeps weeds and soil out.

Common mistakes

  • Mixing up yards and tons when you order. One is volume and the other is weight, and the tool shows both.
  • Using the loose depth for a compacted base. Add the extra, or lay it in 2 to 3 in layers.
  • Measuring a curved bed as a rectangle. Split it into a few rectangles, or use a circle and a ring.
  • Forgetting the edges. A gravel path that spills into the lawn loses stone every season.

Your sizes stay in this page and are not uploaded. We count events without cookies (details).

FAQ

How much does a cubic yard of gravel weigh?

About 1.3 to 1.4 tons, or 2,600 to 2,800 lb, for common stone. The exact figure depends on the stone size and how wet it is. The tool uses 1.35 tons for pea gravel, 1.4 for crushed stone and 1.3 for river rock, and you can change the density to match your supplier.

How much gravel do I need for a driveway?

A 40 ft by 10 ft driveway at 4 in deep with 10% waste takes 5.4 cu yd, which is about 7.6 tons of crushed stone. Many driveways use 4 to 6 in of stone over a compacted base. Check what your site needs.

How do I convert cubic yards of gravel to tons?

Multiply the cubic yards by the density in tons per cubic yard. For 5 cu yd of crushed stone at 1.4 tons per yard, that is 7 tons. Suppliers load by weight, so ask them for their own figure.

How deep should gravel be?

For a walking path, 2 to 3 in. For a patio or paver base, 4 to 6 in, compacted. For a driveway, 4 to 8 in depending on the soil and the traffic. Decorative beds are often 2 in. Deeper layers are laid and compacted in steps.

Should I add extra for compaction?

Yes. Loose stone packs down and the ground under it is never flat. The tool adds 10% by default. For a thin top layer over a flat base, 5% is often enough.

Is it cheaper to buy gravel in bags or in bulk?

A cubic yard is 27 cu ft, so it takes 54 bags of 0.5 cu ft, 27 bags of 1 cu ft or 14 bags of 2 cu ft. Bags cost far more per yard. For the driveway example above that is 74 bags of 2 cu ft, so bulk delivery wins from about a yard up.

What is the difference between pea gravel, crushed stone and river rock?

Pea gravel is small and rounded, so it shifts underfoot but drains well. Crushed stone has sharp edges that lock together, which makes a firmer base. River rock is larger and smooth, and is mostly used for looks and drainage.

Is anything I type uploaded or saved?

No. The sums run in your browser. Your sizes are not put in the address bar, not stored and not counted. Only your choice of US or metric units is remembered in this browser.

More from FLXCode

Share Gravel Calculator