Coordinate Converter
Paste a coordinate in almost any format and get all the others. Everything runs in your browser.
https://flxcode.com/coordinate-converter/
Type or paste one point. The format is detected.
Settings
Example: Milan
- DMS
- Degrees, decimal minutes
- UTM
- MGRS
- Plus code
- Geohash
Datum: WGS 84 only.
Paste lines or a CSV column. Up to 5,000 rows. Nothing is stored or uploaded.
| # | Input | Result | Status |
|---|
No ads. No account. Nothing you type is uploaded. Opening a map link sends that point to OpenStreetMap or Google. How we count
Problem or idea? Email us
Quick start
- Type or paste a coordinate. The format shows up under the box.
- Check the order under the result. If the pin is in the wrong place, press Swap.
- Copy the format you need, or open the point in a map. To put a place on a sign or a flyer, make a QR code from the text you copied.
- For a list, switch to Many points, paste the lines and press Convert.
Formats it understands
| Format | Example | Notes |
|---|---|---|
| Decimal degrees | 45.4642, 9.19 | Latitude first. Negative means south or west. |
| DMS | 45°27'51.1"N 9°11'24"E | Symbols are optional. The letter can come before or after. |
| Degrees, decimal minutes | 45 27.852 N 9 11.4 E | Common on marine and aviation devices. |
| UTM | 32T 514853 5034537 | Zone and band, then easting and northing in metres. |
| MGRS | 32TNR1485334536 | Spaces are optional. More digits mean a smaller square. |
| Plus code | 8FQFF55R+ | Full codes only. Short codes need a nearby place name. |
| Geohash | u0nd9hb | Lower case letters and digits, up to 12 characters. |
Only need degrees, minutes and seconds turned into decimal degrees, with the formula shown? Use the DMS to decimal converter. For latitude and longitude to UTM, with every part explained, use the lat long to UTM converter. There are also pages for UTM to lat long and MGRS to lat long.
Accuracy and limits
- Checked against PROJ 9.5.1 / pyproj 3.7.2 on 748 points, largest difference 0.07 mm. Download the CSV. The points include zone edges, Norway, Svalbard, the 84°N and 80°S limits and the antimeridian.
- WGS 84 only. There are no datum shifts and no national grids yet.
- UTM and MGRS cover 80°S to 84°N. The Norway (32V) and Svalbard (31X to 37X) zone exceptions are applied.
- The precision of the input is kept. A coordinate with 4 decimals is good to about 11 m, so the UTM result is shown to the metre at most and the plus code stays short. When trailing zeros are dropped (9.19 instead of 9.1900) the other number sets the precision.
- MGRS at lower precision is cut off, not rounded, which is how a grid reference works: the square still contains your point.
- "Use my location" shows the accuracy radius your device reports and rounds the results to it. Indoors that can be hundreds of metres.
- No map tiles, no address search, no elevation. The small world outline in the locator is only for orientation.
- Land outline: Natural Earth (public domain).
Troubleshooting
- The pin is in the wrong country: the two numbers are probably swapped. Press Swap, or choose longitude first in Settings.
- The UTM zone looks wrong: check the longitude. A zone is 6 degrees wide, and Norway and Svalbard have wider ones.
- The point is off by tens or hundreds of metres on a map: the source may use another datum such as ED50 or NAD27. This tool assumes WGS 84.
- UTM and MGRS say "Not available here": you are north of 84° or south of 80°. Use decimal degrees, a plus code or a geohash.
How it works
UTM is a transverse Mercator projection on the WGS 84 ellipsoid, computed here with the Krüger series. MGRS letters come from the open source
mgrs package, and plus codes and geohashes are written from their public specifications.
The UTM check is in Accuracy and limits.
Nothing is uploaded. We count events without cookies (details).
Need the zone and band limits, the Norway and Svalbard exceptions or the square letters? See the MGRS and UTM grid zone reference.
FAQ
Which formats does it read?
Decimal degrees, degrees-minutes-seconds (DMS), degrees and decimal minutes, UTM, MGRS, full plus codes (Open Location Code) and geohashes. Paste one and the format is detected. You can also choose the format yourself.
What if latitude and longitude are the wrong way round?
It reads two plain numbers as latitude first, the order map apps and GPS units use, and says so next to the result with a Swap button. The map shows where the point landed, so a swapped pair is easy to spot. If only one order is possible (a first number beyond ±90, or N/S/E/W letters), it reads it that way. GeoJSON and WKT lists put longitude first, so switch to longitude first in Settings for those. "Ask every time" shows both readings and waits for your pick.
How accurate is it?
UTM is computed with a 6th-order series, and MGRS and the other formats are checked as well. The Accuracy section below has the check and the test points. Outputs are rounded to the precision of your input, so five decimals gives about 1 m and the results do not pretend to be sharper.
Which datum does it use?
WGS 84 only, the datum GPS uses. National grids and datum shifts (such as ED50 or NAD27) are not supported. Using them as if they were WGS 84 can put a point tens or hundreds of metres off.
Why does it say UTM does not cover this place?
UTM and MGRS stop at 80°S and 84°N. Near the poles another system (UPS) is used, which this tool does not support yet. Decimal degrees, DMS, plus codes and geohashes still work there.
Are my coordinates uploaded or saved?
No. Everything is converted in your browser. Coordinates, your location and pasted lists are not put in the address bar, not stored and not counted. We only count events such as which format was detected. Opening a map link sends that point to OpenStreetMap or Google, because you asked it to.
How do I convert a long list?
Choose Many points, paste one coordinate per line (or a CSV column), pick the output format and press Convert. Up to 5,000 rows. Rows that cannot be read stay in the list with a reason. Copy all or download a CSV.
More from FLXCode
MGRS to Lat Long ConverterNew
Convert an MGRS reference to latitude and longitude. Shows the square's corner and centre, and says which is which.
UTM to Lat Long and Lat Long to UTMNew
Convert UTM to latitude and longitude, or latitude and longitude to UTM. Each part is shown and explained.
DMS to Decimal Degrees ConverterNew
Turn degrees, minutes and seconds into decimal degrees, or back. Shows the formula with your numbers.
MGRS Grid Zones and MapNew
Look up a grid zone, UTM zone, EPSG code or position. Zone and band tables, exceptions, 100 km letters. CSV and JSON.