FLXCode Soil Calculator

FLXCode apps

Appearance

Soil Calculator

Enter the size of the bed or lawn and the depth of soil. You get cubic yards, tons and bags, with extra for settling.

Area 1

Example with 10% waste

1.3 cubic yards

Amounts
Weight to order1.43 tons (2,868 lb)
Cubic feet35.2
Cubic metres1
Without waste1.19 cu yd, 32 cu ft

Bags instead of bulk

Bags needed
0.5 cu ft bag71 bags
1 cu ft bag36 bags
2 cu ft bag18 bags

The sums

  • Rectangle: 8 ft x 4 ft x 12 in 32 cu ft

No ads. No account. Nothing you type or record is uploaded. We count page events with a daily code. Check it.

Problem or idea? Email us

Quick start

  1. Measure the bed or lawn in feet. Round beds can use Circle, and tree rings use Ring.
  2. Set the depth in inches. A raised bed is as deep as its walls, a lawn is 4 to 6 in.
  3. Pick the soil type for the density, then read the yards, tons or bags.

Worked examples

Computed by the same engine as the tool above, with 10% extra for settling.

JobSoilCu ydTons2 cu ft bags
Raised bed, 8 ft x 4 ft x 12 inGarden soil mix1.31.1718
Two raised beds, 4 ft x 8 ft x 10 in eachGarden soil mix2.171.9630
New lawn, 20 ft x 30 ft x 4 inTopsoil8.158.96110
Low spot, 6 ft across x 8 inFill dirt0.77111
Planter ring, 5 ft across with a 2 ft hole, 10 inTopsoil0.560.628

How the amount is worked out

cubic yards = length (ft) x width (ft) x depth (in) / 12 / 27 x (1 + settling)

Weight is the cubic yards times the tons per cubic yard of the soil. Several areas are added before the settling is applied, so one load covers all of them.

Numbers this uses

Every constant the tool uses is listed here with its source. Where a number varies, you can edit it in the tool.

  • Topsoil is 1.1 tons per cu yd. typical supplier figure, editable.
  • Garden soil mix is 0.9 tons per cu yd. typical supplier figure, editable.
  • Fill dirt is 1.3 tons per cu yd. typical supplier figure, editable.
  • Waste is 10%. settling after watering, soil drops 10% or so; editable.
  • Bags is 0.5, 1 and 2 cu ft. common retail bag sizes, check the label.
  • Cubic yard is 27 cu ft. 3 ft x 3 ft x 3 ft.

Bulk or bags

A cubic yard is 27 bags of 1 cu ft or 14 bags of 2 cu ft. Bagged soil is easy to carry and good for one or two beds. Past about a yard, bulk soil is much cheaper per cubic foot, even with the delivery fee. Ask whether the supplier delivers by the yard or by the ton, and whether they screen the soil.

Common mistakes

  • Filling to the brim. Leave an inch or two below the bed edge so water stays in.
  • Ordering fill dirt for planting. It has no organic matter, so plants struggle.
  • Forgetting that the soil already in the bed counts. If you dig out 6 in, you only need to replace what is missing.
  • Reading a lawn depth as one pass. Spread and rake it in layers so it knits with the soil below.

Your sizes stay in this page and are not uploaded. We count events without cookies (details).

FAQ

How much soil do I need for a raised bed?

Multiply length, width and depth. An 8 ft by 4 ft bed filled 12 in deep holds 32 cu ft, or 1.19 cu yd. With 10% for settling, that is 35.2 cu ft, which is 36 bags of 1 cu ft or 18 bags of 2 cu ft.

How many square feet does a cubic yard of soil cover?

The rule is 324 divided by the depth in inches. A cubic yard covers 81 sq ft at 4 in, 108 sq ft at 3 in and 54 sq ft at 6 in.

How much topsoil for a new lawn?

Most guidance says 4 to 6 in of loosened soil. The 20 ft by 30 ft example at 4 in comes to 8.1 cu yd with 10% extra, or about 9 tons. For an existing lawn you only top-dress with a thin layer, so use 0.25 to 0.5 in.

How much does a cubic yard of soil weigh?

Topsoil is roughly 1.1 tons (2,200 lb) per cubic yard, fill dirt about 1.3 tons, and a lighter soil and compost mix about 0.9 tons. Water adds a lot, so wet soil weighs more. Edit the density in the tool to match your delivery ticket.

What is the difference between topsoil, garden soil and fill dirt?

Topsoil is the screened top layer of earth and is good for lawns and for leveling. Garden soil is a blend with compost, made for beds and containers. Fill dirt has no organic matter and is used to raise or level the ground. Do not plant in it.

Why add 10% for waste?

Fresh soil settles by roughly 10 to 20% after watering and rain, and a bed is never perfectly flat. If you add 10% now, you will not need to top up in the first month.

Can I fill a tall raised bed with only soil?

You can, but it is costly. Many gardeners put logs or branches in the bottom third and use soil on top, which also settles less. If you do, enter only the depth that holds soil.

Is anything I type uploaded or saved?

No. The sums run in your browser. Your sizes are not put in the address bar, not stored and not counted. Only your choice of US or metric units is remembered in this browser.

More from FLXCode

Share Soil Calculator