FLXCode

FLXCode apps

Appearance

Events: Audio

Each event is a fixed word with a value from a short fixed list. Nothing you type, record or open is in them. The rules are on the privacy page.

All categories · How usage counts work · Check it yourself

Tone Generator

  • play: a tone started. Value: frequency band: sub, bass, mid, high, vhigh, ultra.
  • wave: waveform changed. Value: sine, square, triangle or sawtooth.
  • preset: a preset frequency button used. Value: the preset frequency in Hz.
  • wav: a WAV file was downloaded. Value: frequency band.
  • error: audio could not start or WAV failed. Value: audio_start or wav.
  • state_restored: last settings loaded from this browser. Value: none.
  • success: played 10 s or downloaded a WAV. Value: frequency band.

What this app stores and sends

Speaker Test

  • play: a sound started. Value: left, right, both, inphase, outphase or sweep.
  • answer: an answer button used. Value: step and answer: lr, phase or sweep with ok or wrong, for example lr:ok.
  • sweep_done: the sweep reached its end. Value: none.
  • error: audio could not start. Value: audio_start.
  • state_restored: last settings loaded from this browser. Value: none.
  • success: played 10 s or answered a step. Value: "played" or step:answer, for example lr:ok.

What this app stores and sends

Mic Test

  • mic_start: microphone opened. Value: none.
  • mic_denied: microphone could not open. Value: NotAllowed, NotFound, NotReadable or Other.
  • noise_check: background noise check started. Value: none.
  • noise_result: noise check finished. Value: low, moderate or high.
  • record: a test recording started. Value: none (audio never leaves the device).
  • playback: the recording was played back. Value: none.
  • processing_toggle: echo cancellation, noise suppression or auto gain toggled. Value: ec, ns or agc for one switch; mode_call or mode_measure for the all-on and all-off buttons.
  • state_restored: last switches loaded from this browser. Value: none.
  • success: loud signal for 1 second or a playback. Value: "level" or "playback".

What this app stores and sends

60 Hz Tone

  • play: Fundamental or Harmonic pressed. Value: sub or bass (frequency band, not the Hz).
  • preset: mains switch set. Value: 50 or 60.
  • error: audio could not start. Value: audio_start.
  • success: a tone played for 10 seconds. Value: sub or bass.

What this app stores and sends

Noise Generator

  • play: Play pressed. Value: colour: white, pink, brown or green.
  • colour: colour changed. Value: white, pink, brown or green.
  • timer: sleep timer chosen. Value: minutes: 15, 30, 60, 90, 480, or off.
  • wav: a 60 s WAV file was saved. Value: colour.
  • error: audio could not start or WAV failed. Value: audio_start or wav.
  • state_restored: last settings loaded from this browser. Value: none.
  • success: played 10 s or saved a WAV. Value: colour.

What this app stores and sends

Brown Noise, Green Noise, Pink Noise, White Noise

  • play: Play pressed. Value: white, pink, brown or green.
  • colour: colour changed. Value: white, pink, brown or green.
  • timer: sleep timer chosen. Value: minutes: 15, 30, 60, 90, 480, or off.
  • wav: a 60 s WAV file was saved. Value: colour.
  • error: audio could not start or WAV failed. Value: audio_start or wav.
  • success: played 10 s or saved a WAV. Value: colour.

What this app stores and sends

Speaker Rattle Test

  • play: glide started. Value: none.
  • pause: glide paused. Value: frequency in Hz (a test tone, not user data).
  • step: a ±1/±5 Hz step. Value: step size and sign.
  • channel: left, right or both chosen. Value: channel.
  • mark: a rattle frequency marked. Value: sweep or steady.
  • run_done: a run finished narrowing or was skipped. Value: narrowed or skipped.
  • narrow_skip: narrowing skipped. Value: none.
  • repeat: a second run started. Value: none.
  • diagnose: the three-check diagnosis finished. Value: object, one_side, both_room, high_volume or unsure.
  • sweep_done: the glide reached 300 Hz. Value: none.
  • error: audio could not start. Value: audio_start.
  • state_restored: saved volume loaded. Value: none.
  • success: first run finished. Value: mark.

What this app stores and sends

Text to Speech

  • play: Play pressed to read the text from the start. Value: voice type: local or online.
  • pause: Pause pressed. Value: none.
  • stop: Stop pressed. Value: none.
  • finished: the whole text was read. Value: none.
  • file_load: a .txt file was opened (the file stays on the device). Value: none.
  • online_voices: the online voices box was ticked or cleared. Value: on or off.
  • speak_error: speech could not start or failed. Value: no_speech_support, no_voice, no_start, not_allowed, synthesis_failed or other.
  • success: first sentence started playing, once per page view. Value: voice type: local or online.

What this app stores and sends

Left and Right Speaker Test

  • play: a side played. Value: side and sound: left, right, both with bursts or noise.
  • option: sound or spoken labels changed. Value: noise, bursts, speech_on, speech_off.
  • answer: a result chosen. Value: ok, swapped, silent, mono.
  • error: audio could not start. Value: audio_start.
  • state_restored: saved volume loaded. Value: none.
  • success: a result chosen. Value: the result.

What this app stores and sends

Water Eject Sound

  • start: a cycle started. Value: cycle number, 1 to 3.
  • cycle_done: a 20-second cycle ran to its end. Value: cycle number, 1 to 3.
  • stop_early: a cycle stopped before its end. Value: button, escape, output_changed, browser or hidden.
  • outcome: how the speaker sounds was chosen. Value: improved, muffled or worse.
  • error: audio could not start. Value: audio_start.
  • success: first cycle ran to its end. Value: cycle.

What this app stores and sends

Decibel Meter

  • mic_start: microphone opened. Value: none.
  • mic_denied: microphone could not open. Value: NotAllowed, NotFound, NotReadable or Other.
  • mode: weighting changed. Value: a_weighted or flat.
  • calibrate: offset set from a known level. Value: none.
  • success: first real sound or note measured, once per page view. Value: level.

What this app stores and sends

Spectrogram

  • mic_start: microphone opened. Value: none.
  • mic_denied: microphone could not open. Value: NotAllowed, NotFound, NotReadable or Other.
  • mode: frequency axis changed. Value: log or linear.
  • success: first real sound or note measured, once per page view. Value: spectrum.

What this app stores and sends

Online Tuner

  • mic_start: microphone opened. Value: none.
  • mic_denied: microphone could not open. Value: NotAllowed, NotFound, NotReadable or Other.
  • mode: instrument mode changed. Value: chromatic, guitar, bass or ukulele.
  • success: first real sound or note measured, once per page view. Value: pitch.

What this app stores and sends

Pitch Detector

  • mic_start: microphone opened. Value: none.
  • mic_denied: microphone could not open. Value: NotAllowed, NotFound, NotReadable or Other.
  • success: first real sound or note measured, once per page view. Value: pitch.

What this app stores and sends

Note Frequency Chart

  • play: a note was played (max 20 per page view). Value: none.
  • tuning: the A4 choice was changed. Value: 432, 440 or 442.
  • wav: a WAV file was made. Value: none.
  • ref_download: a data file link was clicked. Value: note-frequencies.csv, note-frequencies.json, note-frequency-poster.svg.
  • ref_cite: citation copied. Value: none.
  • ref_print: Print pressed. Value: none.
  • success: first data download, citation copy or print of the page view. Value: download, cite, print.
  • error: audio could not start or the WAV failed. Value: audio_start or wav.

What this app stores and sends